How To Repair A Broken Fuel Line

How to Repair a Safe Fuel Line

by Amy Jensen

Classic Car Engine Refurbished image by Janet Wall from Fotolia.com

Repairing a rubber fuel line requires the correct tools, supplies and noesis. When a leak is found in the prophylactic fuel line, no amount of duct tape, glue or sealant can fix it properly. This is due to the temperature and pressure of the fuel that runs through the line. The only mode to properly repair a safety fuel line is by replacing parts of the condom hose, or the entire hose itself.

Repairing the Line

Step i

Find the leak in the safe fuel line; yous tin can begin to repair it when the engine is off and the car is absurd. This allows you to work in safer weather condition and prevents adventitious burns. The easiest repair method is to supervene upon the entire piece of safety hose.

Step two

Loosen the clamps at both ends of the rubber hose with a screwdriver. Remove the clamps and disassemble the hose from the metal connections. Use rags to grab the gasoline that usually leaks from the hose or connections. Utilise the pliers to pull the tubing from the connection if it doesn't come off hands. Employ a razor blade or knife to cutting a 1-inch incision from the finish of the tubing along the length of the tube. This should loosen the rubber enough so that you tin wiggle it from from its connection.

Step 3

Visit an machine parts shop; take the rubber line and clamps with you. The auto parts specialist should be able to provide the same bore line and new clamps. Purchase the same length of rubber tubing you lot removed, plus two inches. You can always trim the line, but you tin't add together any in one case it is cut.

Reattach the rubber tubing to both connections, securing information technology with the clamps. Make certain the hose fits snugly. Double-check that your clamps are tightened and that the hose does not motility. If the hose is besides long, trim a bit of safety off one edge of the line. Trim but a little bit at a time, until the hose connects hands without any folds in the tubing.

References

Tips

• Some vehicles may require high-pressure, fuel-injection-rated hoses and clamps.

Things You'll Demand

• Pliers
• Screwdriver
• Razor blade or knife
• Rags
• Condom fuel line
• Fuel line clamps

Warnings

• Do not work on a hot vehicle, and exist conscientious when working with gasoline. Dispose of all rags, and clean piece of work areas properly to prevent exposure to gasoline. Practice not smoke near the vehicle during repairs. Keep children and pets out of work areas.

Writer Bio

Amy Jensen began writing professionally in 2006. She has written for various websites and blogs, providing content on everything from travel, didactics and nutrition to dazzler and fashion. Jensen received a Bachelor of Arts in artistic writing from the University of Arizona.

More than Manufactures

Source: https://itstillruns.com/repair-rubber-fuel-line-7590834.html

Posted by: martinezwagood.blogspot.com

Share this post